E2E Video: Rolling Element Linear Guides

Last month we released the Engineer to Engineer (E2E) Series, a new series of 5 minute videos from our Engineers to yours featuring tips, application tricks and maintenance procedures on our YouTube Channel. This series runs as a complement to our Design on Demand series that was also recently released. Our first E2E video featured Senior Motion Systems Engineer Chuck Leonard, and covered how to choose the correct coupling for your actuator or linear guide.

The second entry into the E2E Series comes from Ryan Middlebrook, Product Manager for Machined Products. Ryan will discuss the differences and benefits of two of Misumi’s core rolling element Linear Guides. Ryan will also briefly explain applications in which each product might be used.

Click here to learn more about MISUMI’s Linear Guide options. You can also check out our full 19-Minute Webinar on Miniature Linear Guides or email Ryan directly at rmiddlebrook@misumiusa.com.

Share this Story
Load More Related Articles
Load More By Carlicia Layosa
Load More In Videos

2 Comments


  1. […] Friction & Force Rolling Element Linear Guides Coupling Selection for Linear Guides and […]

    Reply

  2. […] Rolling Element Linear Guides […]

    Reply

Leave a Reply

Your email address will not be published. Required fields are marked *

*

Check Also

MISUMI Extrusion Protective Guard

Times are changing in many industries due to ...

Follow @misumiusa on Instagram

  • Even with 80 sextillion configurations, we know how important one part can be. Thank you to everyone doing their part in the fight against COVID-19. Link in bio #worldhealthday #80sextillion
  • MISUMI is on the move! We are excited to announce the relocation of our North American HQ to Glenstar’s Schaumburg Corporate Center. MISUMI is set to undergo a renovation of nearly 48,000 square feet spread over 2 floors of occupancy space. The relocation will allow a more expressive treatment of the MISUMI brand throughout the space. Read more, link in bio. #80Sextillion #ConfiguredToSaveTime
  • Wellness Fair at the office today. Thanks @chiroone @orangetheory  @weareonedigital #ConfiguredToBeHealthy #80sextillion
  • We crushed it at ATX West! Thanks to everyone who stopped by the MISUMI booth and crushed a can in the Bev-Bot 🔥. Let’s continue the conversation, find out how you can configure to save time. Link in bio. #atxwest #80sextillion #configuredtosavetime
  • MISUMI is excited to be at #slas2020 in San Diego. Are you attending? Stop by for a quick Rapid Design demo, and learn how you can save 30% design time! @slas_org #80sextillion
  • Head instructor John explains the different methods of proper installation for accuracy in linear guides during Master Class in Chicago. #80Sextillion #configuredtohavefun
  • Excited to be at #Engineer3D! in MKE. We started the day by kicking off the keynote presentation (swipe for the boomerang). We’re enjoying talking to and getting to know all the Engineers! Are you in attendance? Stop by the MISUMI booth to learn more about Rapid Design and get some swag #EnginerdOnBoard #gsc3d #80Sextillion #solidworks
  • We got spirit! Excited for football this Sunday 🏈 #configuredtohavefun #80Sextillion