Computer Aided Design Pt 4: The World Of FEA

Whirlwind Introduction to the World of Finite Element Analysis (FEA)

The world of Finite Element Analysis is a deep rabbit hole that can lose many an engineer.  To put it simply, FEA is a computational method used to solve engineering mechanics problems for almost any kind of part geometry.

Although the basic principles and mathematical discipline of FEA were developed decades ago, the discipline has only recently, within the last decade, taken off as computational power has increased.  Although there is much that could be written about FEA theory in mathematical language that would confuse even the smartest engineer, the basic principles of the discipline are actually pretty easy to understand.  The Finite Element Method (FEM) is a mathematical/mechanical approach to solve difficult geometric structural analysis problems that sometimes involve complex geometric shapes and structures by breaking the problem down into many smaller discrete chunks.   These mathematical “chunks” are then solved piece by piece by the software and the results are then presented in colorful fringe plots that highlight “hotspots” of the particular engineering parameter of interest.  The number of parameters that can be solved for depends on the loading configuration and material type, but typically for the simple linear static analyses, an engineer will solve for mechanical strain, stress, reaction loads, and gross deformation of the structure.  There are, of course, many more advanced FEA solution techniques that have emerged over the years as a result of the rapid advent of computational power that can handle advanced mathematical analyses.  These methods and software now enable the engineer to solve dynamic problems with non-linear material properties, but for the sake of illustration, only simple, linear materials, and static load FEA will be profiled here.

In this way, FEA is a great tool for engineers to employ to quickly assess the structural capabilities of particular part geometries when no suitable or applicable hand-calculation or analytical method to determine these parameters may exist.  FEA can be a great quick check for an early conceptual design of a structure, or it can be used in more detail to assess the analytical structural margins of safety for a specific feature of a particular component.  Although there is a lot left to be said about FEA methods and the software that are available, a quick “when-to” list of when FEA is most useful to the engineer will be of great value as a starting point.

Even in simple, linear static structural analyses, FEA is great for the following instances:

• Complex Geometric Parts– FEA is great for analyzing basic geometric shapes such as the interaction of multiple features such as fillets/holes, but it is also great for analyzing other complex geometric shapes with multiple angles of curvature. Although there are structural analytical methods and techniques that exist for single, simple geometric features such as holes and fillets, the only good way to really assess how multiple geometric features interact in full-scale geometry is with an FEA software tool.
• Material Interaction-FEA is a great tool for assessing the response of parts or subassemblies that may consist of multiple sections of distinct materials. Additionally, traditional analytical structural engineering methods become a great deal more complex when a non-isotropic material is introduced into the problem, and most times no analytical method exists to solve such problems.  These problems are great candidates for an FEA because many FEA software and solution techniques handle non-isotropic materials.  FEA is a great tool to quickly and efficiently assess these kinds of materials.
• Non-Linear Analysis– While not all FEA software contains the computational engine to handle non-linear material response modeling, it is almost impossible to conduct this kind of analysis without the finite element method. The numerical equations are much too complex to be handled by any reasonable analytical method, which is why you won’t find an equivalent Roark’s Handbook of equations for non-linear stress/strain packed full of tools to conquer this type of analysis armed with pen and paper.  Increasingly, more and more engineering industries are finding it necessary to perform more non-linear analyses as the analysis tools become readily available and materials are pushed beyond the realm of linear loading in “accident” scenarios such as dynamic impact analyses.  In most cases, FEA software stands ready to answer the non-linear analysis call.

GIF by Fisher Unitech

There are volumes of additional information that could be written on this particular topic, but this should provide a solid introduction for the individual looking to learn a little bit about basic FEA methods and when they may be beneficial to employ.  As computational power has increased over the past few decades, there are more and more types of engineering problems that FEA can tackle.  It’s up to the engineer to pick up a piece of FEA software and dive in to see how deep the FEA pool actually is!

Cover Photo by Comsol

• The 10 Best Tricks of Rapid Design

Engineering and CAD go hand in hand and it is important to have the right CAD models for your projects. Creating ...
• Rocking Rapid Design with SOLIDWORKS Users

MISUMI had the honor of attending the Rockford Area SOLIDWORKS Users Group (RASUG) meeting this week on November 13th. We were ...
• Applications You Didn’t Know Used CAD

Computer Aided Design (CAD) tools are now more accessible than ever and are being employed in almost any industry where “design” ...
• Medical & Biological Uses of CAD

Today Computer Aided Design (CAD) tools are tools being employed to bring about exciting new advances in biological and medical progress, ...

Guest writer and Project Supervisor, Christopher Morris, shares his views on what defines “high-end” CAD.  Read on as Chris evaluates different ...
• Computer Aided Design Pt 4: The World Of FEA

Whirlwind Introduction to the World of Finite Element Analysis (FEA) The world of Finite Element Analysis is a deep rabbit hole ...
• A Peek Into MISUMI’s New Home

MISUMI headquarters has relocated to a state-of-the-art building in Schaumburg’s beautiful Corporate Center. We thought we’d share a snippet of what ...
• How To Measure Fitting Threads in 3 Steps

MISUMI fluid power partner and expert Brennan Industries is back with some tips on how to measure fitting threads. The precise ...
• 5 Things You Should Know about O-ring Face Seal Fittings

Guest brand Brennan is back for another informative post about O-ring Face Seal Fittings (ORFS). They are a highly popular and ...
• NAAMS Locating Pins Hardness Testing Comparison

Material surfaces can wear over time due to the application environment. To combat this, heat treatment is often specified to increase ...
• Design Application Examples Using Linear Shafts

Whether you’re building a new machine or considering making modifications on an existing machine, engineering effort, cost and time are all ...
• The Anatomy of a Micrometer and How to Read Them

A micrometer is one of the instruments used to measure objects of various small sizes. In this post, we will review ...
• A Peek Into MISUMI’s New Home

MISUMI headquarters has relocated to a state-of-the-art building in Schaumburg’s beautiful Corporate Center. We thought we’d share a snippet of what ...
• How To Measure Fitting Threads in 3 Steps

MISUMI fluid power partner and expert Brennan Industries is back with some tips on how to measure fitting threads. The precise ...
• [Case Study] Sourcing Custom Cable Harnesses

Background An automotive company urgently needed over 80,000 custom cable harnesses for a project.  Prototypes had yet to be built for ...
• 5 Things You Should Know about O-ring Face Seal Fittings

Guest brand Brennan is back for another informative post about O-ring Face Seal Fittings (ORFS). They are a highly popular and ...
• Design Application Examples Using Linear Shafts

Whether you’re building a new machine or considering making modifications on an existing machine, engineering effort, cost and time are all ...
• The Anatomy of a Micrometer and How to Read Them

A micrometer is one of the instruments used to measure objects of various small sizes. In this post, we will review ...

1. What Defines "High-End" CAD? | MISUMI USA Blog

January 29, 2018 at 1:11 pm

[…] CAD Pt 4: The World of FEA […]

2. James

July 14, 2019 at 11:23 pm

Amazing Content, Thanks for sharing.
Structural Analysis in USA

A Peek Into MISUMI’s New Home

MISUMI headquarters has relocated to a state-of-the-art building ...